Buff hardwood floors are final stage of refinishing task. This can be useful solution for certain circumstances. There are some steps to complete for buffing the floor. First of all, you have to clear you room as well as clean the floor before buffing. Prepare all materials as required that include buffer, vacuum, polishing and buffing pads, the polish and a paint tray in big size. After these materials are ready, start buffing using floor buffer. In order to create gentle abrasion of floor surface that can make it smooth evenly, keep your motion really gently and stable. Be consistent in the angle and pressure, while not working on the same area repeatedly.
You can use your hand when it is necessary, for instance, to roughen the angles near the walls. Since it may be impossible for the buffer to reach this remote angle, using your hand helps to not causing any damage when you buff hardwood floors. After the entire floor finish is scraped off, you should remove all dust by vacuuming the area once more. Wipe the remaining dust with moist fabric and let the floors dry completely.
The next is applying the floor finish that has been chosen. Coating the floor should be done by following the grain of board until all part is covered. It is suggested to not applying too little or too much finish, while ensuring to apply light layers twice. When the work is completely done, let the floor to dry. You can accelerate this drying process as well as removing strong odor by ventilating the space to complete buff hardwood floors.